Migration from older versions

To upgrade to a new version of Keycloak first download and install the new version of Keycloak. Once the new version is installed migrate the config files, database, keycloak-server.json, providers, themes and applications to the new applications.

This chapter contains some general migration details which are applicable to all versions. There are instructions for migration that is only applicable to a specific release. If you are upgrading from a very old version you need to go through all intermediate version specific migration.

It’s highly recommended that you backup your database prior to upgrading Keycloak.

Migration from a candidate release (CR) to a Final release is not supported. We do however recommend that you test migration for a CR so we can resolve any potential issues before the Final is released.

Migration of config files using migration scripts

As part of your migration, you should use your old versions of config files standalone.xml, standalone-ha.xml, and/or domain.xml. These files typically contain configuration that is unique to your own environment. So, the first thing to do as part of a migration is to copy those files to the new Keycloak server installation, replacing the default versions.

If migrating from Keycloak version 2.1.0 or older, you should also copy keycloak-server.json to standalone/configuration and/or domain/configuration.

There will be configuration in those config files that pertains to Keycloak, which will need to be upgraded. For that, you should run one or more of the appropriate upgrade scripts. They are migrate-standalone.cli, migrate-standalone-ha.cli, migrate-domain-standalone.cli and migrate-domain-clustered.cli.

The server should not be running when you execute a migration script.

Example for running migrate-standalone.cli
$ .../bin/jboss-cli.sh --file=migrate-standalone.cli

Note that for upgrading domain.xml, there are two migration scripts, migrate-domain-standalone.cli and migrate-domain-clustered.cli. These scripts migrate separate profiles within your domain.xml that were originally shipped with Keycloak. If you have changed the name of the profile there is a variable near the top of the script that you will need to change.

If you are migrating keycloak-server.json, this will also be migrated as needed. If you prefer, you can migrate keycloak-server.json beforehand using the instructions in the next section.

One thing to note is that the migration scripts only work for Keycloak versions 1.8.1 forward. If migrating an older version you will need to manually upgrade your config files to at least be 1.8.1 compliant.

Lastly, you may want to examine the contents of the scripts before running. They show exactly what will be changed for each version. They also have values at the top of the script that you may need to change based on your environment.

Migrate and convert keycloak-server.json

If you ran one of the migration scripts from the previous section then you have probably already migrated your keycloak-server.json. This section is kept here for reference. If you prefer, you can follow the instructions in this section before running the migration scripts above.

You should copy standalone/configuration/keycloak-server.json from the old version to make sure any configuration changes you’ve done are added to the new installation. The version specific section below will list any changes done to this file that you have to do when upgrading from one version to another.

Keycloak is moving away from the use of keycloak-server.json. For this release, the server will still work if this file is in standalone/configuration/keycloak-server.json, but it is highly recommended that you convert to using standalone.xml, standalone-ha.xml, or domain.xml for configuration. We may soon remove support for keycloak-server.json.

To convert your keycloak-server.json, you will use a jboss-cli operation called migrate-json. It is recommended that you run this operation while the server is not running.

The migrate-json operation assumes you are migrating with an xml configuration file from an old version. For example, you should not try to migrate your keycloak-server.json to a standalone.xml file that already contains <spi> and <theme> tags under the keycloak subsystem. Before migration, your keycloak subsystem should look like the one below:

standalone.xml
<subsystem xmlns="urn:jboss:domain:keycloak-server:1.1">
    <web-context>auth</web-context>
</subsystem>

The jboss-cli tool is discussed in detail in Server Installation and Configuration.

migrate-json in Standalone Mode

For standalone, you will issue the migrate-json operation in embed mode without the server running.

Standalone keycloak-server.json migration
$ .../bin/jboss-cli.sh
[disconnected /] embed-server --server-config=standalone.xml
[standalone@embedded /] /subsystem=keycloak-server/:migrate-json

The migrate-json operation will look for your keycloak-server.json file in the standalone/configuration directory. You also have the option of using the file argument as shown in the domain mode example below.

migrate-json in Domain Mode

For a domain, you will stop the Keycloak server and issue the migrate-json operation against the running domain controller. If you choose not to stop the Keycloak server, the operation will still work, but your changes will not take affect until the Keycloak server is restarted.

Domain mode migration requires that you use the file parameter to upload your keycloak-server.json from a local directory. The example below shows connecting to localhost. You will need to substitute the address of your domain controller.

Domain mode keycloak-server.json migration
$ .../bin/jboss-cli.sh -c --controller=localhost:9990
[domain@localhost:9990 /] cd profile=auth-server-clustered
[domain@localhost:9990 profile=auth-server-clustered] cd subsystem=keycloak-server
[domain@localhost:9990 subsystem=keycloak-server] :migrate-json(file="./keycloak-server.json")

You will need to repeat the migrate-json operation for each profile containing a keycloak-server subsystem.

Migrate database

Keycloak can automatically migrate the database schema, or you can choose to do it manually.

Relational database

To enable automatic upgrading of the database schema set the migrationStrategy property to update for the default connectionsJpa provider:

Edit xml
<spi name="connectionsJpa">
    <provider name="default" enabled="true">
        <properties>
            ...
            <property name="migrationStrategy" value="update"/>
        </properties>
    </provider>
</spi>
Equivalent CLI command for above
/subsystem=keycloak-server/spi=connectionsJpa/provider=default/:map-put(name=properties,key=migrationStrategy,value=update)

When you start the server with this setting your database will automatically be migrated if the database schema has changed in the new version.

To manually migrate the database set the migrationStrategy to manual. When you start the server with this configuration it will check if the database needs migration. If changes are needed the required changes are written to an SQL file that you can review and manually run against the database.

There’s also the option to disable migration by setting the migrationStrategy to validate. With this configuration the database will be checked at startup and if it is not migrated the server will exit.

Mongo

Mongo doesn’t have a schema, but there may still be things like collections and indexes that are added to new releases. To enable automatic creation of these set the migrationStrategy property to update for the default connectionsMongo provider:

Edit xml
<spi name="connectionsMongo">
    <provider name="default" enabled="true">
        <properties>
            ...
            <property name="migrationStrategy" value="update"/>
        </properties>
    </provider>
</spi>
Equivalent CLI command for above
/subsystem=keycloak-server/spi=connectionsMongo/provider=default/:map-put(name=properties,key=migrationStrategy,value=update)

The Mongo provider does not have the option to manually apply the required changes.

There’s also the option to disable migration by setting the migrationStrategy to validate. With this configuration the database will be checked at startup and if it is not migrated the server will exit.

Migrate providers

If you have implemented any SPI providers you need to copy them to the new server. The version specific section below will mention if any of the SPI’s have changed. If they have you may have to update your code accordingly.

Migrate themes

If you have created a custom theme you need to copy them to the new server. The version specific section below will mention if changes have been made to themes. If there is you may have to update your themes accordingly.

Migrate application

If you deploy applications directly to the Keycloak server you should copy them to the new server. For any applications including those not deployed directly to the Keycloak server you should upgrade the adapter. The version specific section below will mention if any changes are required to applications.

Version specific migration

Migrating to 2.5.1

Migration of old offline tokens

If you migrate from version 2.2.0 or older and you used offline tokens, then your offline tokens didn’t have KID in the token header. We added KID to the token header in 2.3.0 together with the ability to have multiple realm keys, so Keycloak is able to find the correct key based on the token KID.

For the offline tokens without KID, Keycloak 2.5.1 will always use the active realm key to find the proper key for the token verification. In other words, migration of old offline tokens will work. So for example, your user requested offline token in 1.9.8, then you migrate from 1.9.8 to 2.5.1 and then your user will be still able to refresh his old offline token in 2.5.1 version.

But there is limitation, that once you change the realm active key, the users won’t be able to refresh old offline tokens anymore. So you shouldn’t change the active realm key until all your users with offline tokens refreshed their tokens. Obviously newly refreshed tokens will have KID in the header, so after all users exchange their old offline tokens, you are free to change the active realm key.

Migrating to 2.5.0

Changes to the infinispan caches

The realms cache defined in the infinispan subsystem in standalone.xml or standalone-ha.xml configuration file, now has the eviction with the 10000 records by default. This is the same default like the users cache.

Also the authorization cache now doesn’t have any eviction on it by default.

Migrating to 2.4.0

Server SPI split into Server SPI and Sever SPI Private

The keycloak-server-spi module has been split into keycloak-server-spi and keycloak-server-spi-private. APIs within keycloak-server-spi will not change between minor releases, while we reserve the right and may quite likely change APIs in keycloak-server-spi-private between minor releases.

Key encryption algorithm in SAML assertions

Key in SAML assertions and documents are now encrypted using RSA-OAEP encryption scheme. If you want to use encrypted assertions, make sure that service providers understand this encryption scheme. In the unlikely case that SP would not be able to handle the new scheme, Keycloak can be made to use legacy RSA-v1.5 encryption scheme when started with system property keycloak.saml.key_trans.rsa_v1.5 set to true.

Infinispan caches realms and users are always local

Even if you use Keycloak in cluster, the caches realms and users defined in infinispan subsystem in standalone-ha.xml are always local caches now. There is separate cache work, which handles sending invalidation messages between cluster nodes and informing whole cluster what records in underlying realms and users caches should be invalidated.

Migrating to 2.3.0

Default max results on paginated endpoints

All Admin REST API endpoints that support pagination now have a default max results set to 100. If you want to return more than 100 entries you need to explicitly specify that with ?max=<RESULTS>.

In 2.3.0 release we added support for Public Key Rotation. When admin rotates the realm keys in Keycloak admin console, the Client Adapter will be able to recognize it and automatically download new public key from Keycloak. However this automatic download of new keys is done just if you don’t have realm-public-key option in your adapter with the hardcoded public key. For this reason, we don’t recommend to use realm-public-key option in adapter configuration anymore.

Note this option is still supported, but it may be useful just if you really want to have hardcoded public key in your adapter configuration and never download the public key from Keycloak. In theory, one reason for this can be to avoid man-in-the-middle attack if you have untrusted network between adapter and Keycloak, however in that case, it is much better option to use HTTPS, which will secure all the requests between adapter and Keycloak.

Added infinispan cache keys

In this release, we added new cache keys to the infinispan subsystem, which is defined in standalone.xml or standalone-ha.xml configuration file. It has also some eviction and expiration defined. This cache is internally used for caching the external public keys of the entities trusted by the server (Identity providers or clients, which uses authentication with signed JWT).

Migrating to 2.2.0

databaseSchema property deprecated

The databaseSchema property for both JPA and Mongo is now deprecated and has been replaced by initializeEmpty and migrationStrategy. initializeEmpty can bet set to true or false and controls if an empty database should be initialized. migrationStrategy can be set to update, validate and manual. manual is only supported for relational databases and will write an SQL file with the required changes to the database schema. Please note that for Oracle database, the created SQL file contains SET DEFINE OFF command understood by Oracle SQL clients. Should the script be consumed by any other client, please replace the lines with equivalent command of the tool of your choice that disables variable expansion or remove it completely if such functionality is not applicable.

Changes in Client’s Valid Redirect URIs

The following scenarios are affected:

  • When a Valid Redirect URI with query component is saved in a Client (e.g. http://localhost/auth?foo=bar), redirect_uri in authorization request must exactly match this URI (or other registered URI in this Client).

  • When a Valid Redirect URI without a query component is saved in a Client, redirect_uri must exactly match as well.

  • Wildcards in registered Valid Redirect URIs are no longer supported when query component is present in this URI, so the redirect_uri needs to exactly match this saved URI as well.

  • Fragments in registered Valid Redirect URIs (like http://localhost/auth#fragment) are no longer allowed.

Authenticate by default removed from Identity Providers

Identity providers no longer has an option to set it as a default authenticaton provider. Instead go to Authentication, select the Browser flow and configure the Identity Provider Redirector. It has an option to set the default identity provider.

Migrating to 2.0.0

Upgrading from 1.0.0.Final no longer supported

Upgrading from 1.0.0.Final is no longer supported. To upgrade to this version upgrade to 1.9.8.Final prior to upgrading to 2.0.0.

Migrating to 1.9.5

Default password hashing interval increased to 20K

The default password hashing interval for new realms has been increased to 20K (from 1 previously). This change will have an impact on performance when users authenticate. For example with the old default (1) it takes less than 1 ms to hash a password, but with the new default (20K) the same operation can take 50-100 ms.

Migrating to 1.9.3

Add User script renamed

The script to add admin users to Keycloak has been renamed to add-user-keycloak.

Migrating to 1.9.2

Adapter option auth-server-url-for-backend-requests removed

We’ve removed the option auth-server-url-for-backend-requests as there were issues in some scenarios when it was used. In more details, it was possible to access the Keycloak server from 2 different contexts (internal and external), which was causing issues in token validations etc.

If you still want to use the optimization of network, which this option provided (avoid the application to send backchannel requests through loadbalancer but send them to local Keycloak server directly) you may need to handle it at hosts configuration (DNS) level.

Migrating to 1.9.0

Themes and providers directory moved

We’ve moved the themes and providers directories from standalone/configuration/themes and standalone/configuration/providers to themes and providers respectively. If you have added custom themes and providers you need to move them to the new location. You also need to update keycloak-server.json as it’s changed due to this.

Adapter Subsystems only bring in dependencies if Keycloak is on

Previously, if you had installed our SAML or OIDC Keycloak subsystem adapters into Wildfly or JBoss EAP, we would automatically include Keycloak client jars into EVERY application irregardless if you were using Keycloak or not. These libraries are now only added to your deployment if you have Keycloak authentication turned on for that adapter (via the subsystem, or auth-method in web.xml

Client Registration service endpoints moved

The Client Registration service endpoints have been moved from {realm}/clients to {realm}/clients-registrations.

Session state parameter in authentication response renamed

In the OpenID Connect authentication response we used to return the session state as session-state this is not correct according to the specification and has been renamed to session_state.

Deprecated OpenID Connect endpoints

In 1.2 we deprecated a number of endpoints that where not consistent with the OpenID Connect specifications, these have now been removed. This also applies to the validate token endpoints that was replaced with the new introspect endpoint in 1.8.

Updates to theme templates

Feedback in template.ftl has been moved and format has changed slightly.

Module and Source Code Re-org

Most of our modules and source code have been consolidated into two maven modules: keycloak-server-spi and keycloak-services. SPI interfaces are in server-spi, implementations are in keycloak-services. All JPA dependent modules have been consolidated under keycloak-model-jpa. Same goes with mongo and Infinispan under modules keycloak-model-mongo and keycloak-model-infinispan.

For adapters, session id changed after login

To plug a security attack vector, for platforms that support it (Tomcat 8, Undertow/Wildfly, Jetty 9), the Keycloak OIDC and SAML adapters will change the session id after login. You can turn off this behavior check adapter config switches.

SAML SP Client Adapter Changes

Keycloak SAML SP Client Adapter now requires a specific endpoint, /saml to be registered with your IDP.

Migrating to 1.8.0

Admin account

In previous releases we shipped with a default admin user with a default password, this has now been removed. If you are doing a new installation of 1.8 you will have to create an admin user as a first step. This can be done easily by following the steps in Admin User.

OAuth2 Token Introspection

In order to add more compliance with OAuth2 specification, we added a new endpoint for token introspection. The new endpoint can reached at /realms/{realm}/protocols/openid-connect/token/introspect and it is solely based on RFC-7662.

The /realms/{realm}/protocols/openid-connect/validate endpoint is now deprecated and we strongly recommend you to move to the new introspection endpoint as soon as possible. The reason for this change is that RFC-7662 provides a more standard and secure introspection endpoint.

The new token introspection URL can now be obtained from OpenID Connect Provider’s configuration at /realms/{realm}/.well-known/openid-configuration. There you will find a claim with name token_introspection_endpoint within the response. Only confidential clients are allowed to invoke the new endpoint, where these clients will be usually acting as a resource server and looking for token metadata in order to perform local authorization checks.

Migrating to 1.7.0.CR1

Direct access grants disabled by default for clients

In order to add more compliance with OpenID Connect specification, we added flags into admin console to Client Settings page, where you can enable/disable various kinds of OpenID Connect/OAuth2 flows (Standard flow, Implicit flow, Direct Access Grants, Service Accounts). As part of this, we have Direct Access Grants (corresponds to OAuth2 Resource Owner Password Credentials Grant) disabled by default for new clients.

Clients migrated from previous version have Direct Access Grants enabled just if they had flag Direct Grants Only on. The Direct Grants Only flag was removed as if you enable Direct Access Grants and disable both Standard+Implicit flow, you will achieve same effect.

We also added built-in client admin-cli to each realm. This client has Direct Access Grants enabled. So if you’re using Admin REST API or Keycloak admin-client, you should update your configuration to use admin-cli instead of security-admin-console as the latter one doesn’t have direct access grants enabled anymore by default.

Option 'Update Profile On First Login' moved from Identity provider to Review Profile authenticator

In this version, we added First Broker Login, which allows you to specify what exactly should be done when new user is logged through Identity provider (or Social provider), but there is no existing Keycloak user yet linked to the social account. As part of this work, we added option First Login Flow to identity providers where you can specify the flow and then you can configure this flow under Authentication tab in admin console.

We also removed the option Update Profile On First Login from the Identity provider settings and moved it to the configuration of Review Profile authenticator. So once you specify which flow should be used for your Identity provider (by default it’s First Broker Login flow), you go to Authentication tab, select the flow and then you configure the option under Review Profile authenticator.

Element 'form-error-page' in web.xml not supported anymore

form-error-page in web.xml will no longer work for client adapter authentication errors. You must define an error-page for the various HTTP error codes. See documentation for more details if you want to catch and handle adapter error conditions.

IdentityProviderMapper changes

There is no change in the interface itself or method signatures. However there is some change in behavior. We added First Broker Login flow in this release and the method IdentityProviderMapper.importNewUser is now called after First Broker Login flow is finished. So if you want to have any attribute available in Review Profile page, you would need to use the method preprocessFederatedIdentity instead of importNewUser . You can set any attribute by invoke BrokeredIdentityContext.setUserAttribute and that will be available on Review profile page.

Migrating to 1.6.0.Final

Option that refresh tokens are not reusable anymore

Old versions of Keycloak allowed reusing refresh tokens multiple times. Keycloak still permits this, but also have an option Revoke refresh token to disallow it. Option is in in admin console under token settings. When a refresh token is used to obtain a new access token a new refresh token is also included. When option is enabled, then this new refresh token should be used next time the access token is refreshed. It won’t be possible to reuse old refresh token multiple times.

Some packages renamed

We did a bit of restructure and renamed some packages. It is mainly about renaming internal packages of util classes. The most important classes used in your application ( for example AccessToken or KeycloakSecurityContext ) as well as the SPI are still unchanged. However there is slight chance that you will be affected and will need to update imports of your classes. For example if you are using multitenancy and KeycloakConfigResolver, you will be affected as for example class HttpFacade was moved to different package - it is org.keycloak.adapters.spi.HttpFacade now.

Persisting user sessions

We added support for offline tokens in this release, which means that we are persisting "offline" user sessions into database now. If you are not using offline tokens, nothing will be persisted for you, so you don’t need to care about worse performance for more DB writes. However in all cases, you will need to update standalone/configuration/keycloak-server.json and add userSessionPersister like this:

"userSessionPersister": {
    "provider": "jpa"
},

If you want sessions to be persisted in Mongo instead of classic RDBMS, use provider mongo instead.

Migrating to 1.5.0.Final

Realm and User cache providers

Infinispan is now the default and only realm and user cache providers. In non-clustered mode a local Infinispan cache is used. We’ve also removed our custom in-memory cache and the no cache providers. If you have realmCache or userCache set in keycloak-server.json to mem or none please remove these. As Infinispan is the only provider there’s no longer any need for the realmCache and userCache objects so these can be removed.

Uses Session providers

Infinispan is now the default and only user session provider. In non-clustered mode a local Infinispan cache is used. We’ve also removed the JPA and Mongo user session providers. If you have userSession set in keycloak-server.json to mem, jpa or mongo please remove it. As Infinispan is the only provider there’s no longer any need for the userSession object so it can be removed.

For anyone that wants to achieve increased durability of user sessions this can be achieved by configuring the user session cache with more than one owner or use a replicated cache. It’s also possible to configure Infinispan to persist caches, although that would have impacts on performance.

Contact details removed from registration and account management

In the default theme we have now removed the contact details from the registration page and account management. The admin console now lists all the users attributes, not just contact specific attributes. The admin console also has the ability to add/remove attributes to a user. If you want to add contact details, please refer to the address theme included in the examples.

Migrating to 1.3.0.Final

Direct Grant API always enabled

In the past Direct Grant API (or Resource Owner Password Credentials) was disabled by default and there was an option on a realm to enable it. The Direct Grant API is now always enabled and the option to enable/disable for a realm is removed.

Database changed

There are again few database changes. Remember to backup your database prior to upgrading.

UserFederationProvider changed

There are few minor changes in UserFederationProvider interface. You may need to sync your implementation when upgrade to newer version and upgrade few methods, which has changed signature. Changes are really minor, but were needed to improve performance of federation.

WildFly 9.0.0.Final

Following on from the distribution changes that was done in the last release the standalone download of Keycloak is now based on WildFly 9.0.0.Final. This also affects the overlay which can only be deployed to WildFly 9.0.0.Final or JBoss EAP 6.4.0.GA. WildFly 8.2.0.Final is no longer supported for the server.

WildFly, JBoss EAP and JBoss AS7 adapters

There are now 3 separate adapter downloads for WildFly, JBoss EAP and JBoss AS7:

  • eap6

  • wf9

  • wf8

  • as7

Make sure you grab the correct one.

You also need to update standalone.xml as the extension module and subsystem definition has changed. See Adapter Installation for details.

Migrating from 1.2.0.Beta1 to 1.2.0.RC1

Distribution changes

Keycloak is now available in 3 downloads: standalone, overlay and demo bundle. The standalone is intended for production and non-JEE developers. Overlay is aimed at adding Keycloak to an existing WildFly 8.2 or EAP 6.4 installation and is mainly for development. Finally we have a demo (or dev) bundle that is aimed at developers getting started with Keycloak. This bundle contains a WildFly server, with Keycloak server and adapter included. It also contains all documentation and examples.

Database changed

This release contains again a number of changes to the database. The biggest one is Application and OAuth client merge. Remember to backup your database prior to upgrading.

Application and OAuth client merge

Application and OAuth clients are now merged into Clients. The UI of admin console is updated and database as well. Your data from database should be automatically updated. The previously set Applications will be converted into Clients with Consent required switch off and OAuth Clients will be converted into Clients with this switch on.

Migrating from 1.1.0.Final to 1.2.0.Beta1

Database changed

This release contains a number of changes to the database. Remember to backup your database prior to upgrading.

iss in access and id tokens

The value of iss claim in access and id tokens have changed from realm name to realm url. This is required by OpenID Connect specification. If you’re using our adapters there’s no change required, other than if you’ve been using bearer-only without specifying auth-server-url you have to add it now. If you’re using another library (or RSATokenVerifier) you need to make the corresponding changes when verifying iss.

OpenID Connect endpoints

To comply with OpenID Connect specification the authentication and token endpoints have been changed to having a single authentication endpoint and a single token endpoint. As per-spec response_type and grant_type parameters are used to select the required flow. The old endpoints (/realms/{realm}/protocols/openid-connect/login, /realms/{realm}/protocols/openid-connect/grants/access, /realms/{realm}/protocols/openid-connect/refresh, /realms/{realm}/protocols/openid-connect/access/codes) are now deprecated and will be removed in a future version.

Theme changes

The layout of themes have changed. The directory hierarchy used to be type/name this is now changed to name/type. For example a login theme named sunrise used to be deployed to standalone/configuration/themes/login/sunrise, which is now moved to standalone/configuration/themes/sunrise/login. This change was done to make it easier to have group the different types for the same theme into one folder.

If you deployed themes as a JAR in the past you had to create a custom theme loader which required Java code. This has been simplified to only requiring a plain text file (META-INF/keycloak-themes.json) to describe the themes included in a JAR. See the themes section in the docs for more information.

Claims changes

Previously there was Claims tab in admin console for application and OAuth clients. This was used to configure which attributes should go into access token for particular application/client. This was removed and replaced with Protocol mappers, which are more flexible.

You don’t need to care about migration of database from previous version. We did migration scripts for both RDBMS and Mongo, which should ensure that claims configured for particular application/client will be converted into corresponding protocol mappers (Still it’s safer to backup DB before migrating to newer version though). Same applies for exported JSON representation from previous version.

Social migration to identity brokering

We refactored social providers SPI and replaced it with identity brokering SPI, which is more flexible. The Social tab in admin console is renamed to Identity Provider tab.

Again you don’t need to care about migration of database from previous version similarly like for Claims/protocol mappers. Both configuration of social providers and "social links" to your users will be converted to corresponding Identity providers.

Only required action from you would be to change allowed Redirect URI in the admin console of particular 3rd party social providers. You can first go to the Keycloak admin console and copy Redirect URI from the page where you configure the identity provider. Then you can simply paste this as allowed Redirect URI to the admin console of 3rd party provider (IE. Facebook admin console).

Migrating from 1.1.0.Beta2 to 1.1.0.Final

  • WEB-INF/lib +standalone/configuration/providers+providers

Migrating from 1.1.0.Beta1 to 1.1.0.Beta2

  • Adapters are now a separate download. They are not included in appliance and war distribution. We have too many now and the distro is getting bloated.

  • org.keycloak.adapters.tomcat7.KeycloakAuthenticatorValve +org.keycloak.adapters.tomcat.KeycloakAuthenticatorValve

  • JavaScript adapter now has idToken and idTokenParsed properties. If you use idToken to retrieve first name, email, etc. you need to change this to idTokenParsed.

  • The as7-eap-subsystem and keycloak-wildfly-subsystem have been merged into one keycloak-subsystem. If you have an existing standalone.xml or domain.xml, you will need edit near the top of the file and change the extension module name to org.keycloak.keycloak-subsystem. For AS7 only, the extension module name is org.keycloak.keycloak-as7-subsystem.

  • Server installation is no longer supported on AS7. You can still use AS7 as an application client.

Migrating from 1.0.x.Final to 1.1.0.Beta1

  • RealmModel JPA and Mongo storage schema has changed

  • UserSessionModel JPA and Mongo storage schema has changed as these interfaces have been refactored

  • Upgrade your adapters, old adapters are not compatible with Keycloak 1.1. We interpreted JSON Web Token and OIDC ID Token specification incorrectly. 'aud' claim must be the client id, we were storing the realm name in there and validating it.

Migrating from 1.0 RC-1 to RC-2

  • A lot of info level logging has been changed to debug. Also, a realm no longer has the jboss-logging audit listener by default. If you want log output when users login, logout, change passwords, etc. enable the jboss-logging audit listener through the admin console.

Migrating from 1.0 Beta 4 to RC-1

  • logout REST API has been refactored. The GET request on the logout URI does not take a session_state parameter anymore. You must be logged in in order to log out the session. You can also POST to the logout REST URI. This action requires a valid refresh token to perform the logout. The signature is the same as refresh token minus the grant type form parameter. See documentation for details.

Migrating from 1.0 Beta 1 to Beta 4

  • LDAP/AD configuration is changed. It is no longer under the "Settings" page. It is now under Users→Federation. Add Provider will show you an "ldap" option.

  • Authentication SPI has been removed and rewritten. The new SPI is UserFederationProvider and is more flexible.

  • ssl-not-required +ssl-required +all +external +none

  • DB Schema has changed again.

  • Created applications now have a full scope by default. This means that you don’t have to configure the scope of an application if you don’t want to.

  • Format of JSON file for importing realm data was changed. Now role mappings is available under the JSON record of particular user.

Migrating from 1.0 Alpha 4 to Beta 1

  • DB Schema has changed. We have added export of the database to Beta 1, but not the ability to import the database from older versions. This will be supported in future releases.

  • For all clients except bearer-only applications, you must specify at least one redirect URI. Keycloak will not allow you to log in unless you have specified a valid redirect URI for that application.

  • Direct Grant API +ON

  • standalone/configuration/keycloak-server.json

  • JavaScript adapter

  • Session Timeout

Migrating from 1.0 Alpha 2 to Alpha 3

  • SkeletonKeyToken, SkeletonKeyScope, SkeletonKeyPrincipal, and SkeletonKeySession have been renamed to: AccessToken, AccessScope, KeycloakPrincipal, and KeycloakAuthenticatedSession respectively.

  • ServleOAuthClient.getBearerToken() method signature has changed. It now returns an AccessTokenResponse so that you can obtain a refresh token too.

  • Adapters now check the access token expiration with every request. If the token is expired, they will attempt to invoke a refresh on the auth server using a saved refresh token.

  • Subject in AccessToken has been changed to the User ID.

Migrating from 1.0 Alpha 1 to Alpha 2

  • DB Schema has changed. We don’t have any data migration utilities yet as of Alpha 2.

  • JBoss and Wildfly adapters are now installed via a JBoss/Wildfly subsystem. Please review the adapter installation documentation. Edits to standalone.xml are now required.

  • There is a new credential type "secret". Unlike other credential types, it is stored in plain text in the database and can be viewed in the admin console.

  • There is no longer required Application or OAuth Client credentials. These client types are now hard coded to use the "secret" credential type.

  • Because of the "secret" credential change to Application and OAuth Client, you’ll have to update your keycloak.json configuration files and regenarate a secret within the Application or OAuth Client credentials tab in the administration console.